Westfield MKX Series Swingaway Augers
Fort Collins: (970) 221-5296
Keenesburg: (303) 732-4321
Get A Quote
Since 1951, AGI Westfield has developed and refined the best grain augers available. We’ve learned that farmers want affordable, simple, straightforward designs for labor saving performance and dependability. AGI Westfield’s grain augers are built with the best materials, components and features to provide value and performance you can count on. To ensure your MKX is ready when you need it, AGI Westfield has extended their program to two years limited warranty. The MKX 10 and 13 Series is available in 10″ and 13″ tube diameters and lengths from 53′ to 114′ and capacity up to 11,000 bph.
MKX10 up to 6,600 bph | 53′ – 83′ lengths
MKX13 up to 11,000 bph | 64′ – 114′ lengths
Trussing & Frame: The MKX Series is designed to maintain rigid alignment during heavy loads. The MKX withstands bowing to maintain proper tube and flighting alignment, making it easier to line the auger up with the bin cap opening. The A-frame undercarriage is built to hold the auger in position and works with wide-standing axles to prevent the auger from swaying or moving once it has been positioned at the bin and the grain starts flowing.
Hopper & Hopper Lift Arm: The low profile hopper features left and right hand flighting to pull grain toward the center of the hopper so it flows efficiently up into the tapered boot. The 6” rubber extension along the edge of the hopper prevents grain from splashing. The hopper lift arm and hopper can be positioned on the left or right hand side of the auger, offering the convenience of unloading from either side.
Built Strong & Lasts Long: AGI Westfield developed Wear Edge Technology™ to extend the life of the flighting. This provides an extra layer of steel welded to the edge on critical wear points. As a result, flighting lasts longer and needs to be replaced less often – saving time and money.
Smooth & Efficient Operation: The MKX Series uses square, one-bolt flight connections to ensure the flighting maintains proper alignment for smooth operation. The upper flight thrust adjuster equalizes the pressure between the upper and lower bearings during operation. This extends the life of the lower boot bearing.
Easy to Service & Maintain: The removable slip-on boot flight uses Wear Edge Technology™ and can be quickly replaced without having to remove and replace the entire lower flight. The MKX Series features six easily accessible service points to allow for quick maintenance of u-joints, chains, bearings, and gearboxes. The u-joint end caps have external grease zerks, making it easy to service and maintain.
|SPECS||MKX10-53 | MKX10-63 | MKX10-73|
|TUBE GAUGE||12 GA|
|TUBE CONNECTORS||Heavy-Duty ³/16″ (0.5cm) Angle Flange|
|MAIN FLIGHTING||9″ (22.9cm) OD x 7 GA Stretched and Welded with Wear Edge Technology™ at Critical Points|
|WEAR EDGE TECHNOLOGY™||¼” (0.6cm) plus 10 GA Ribbon Weld = 5/16″ (0.8cm) Wear Edge Technology™ on Critical Grain Transfer Points|
|FLIGHTING SHAFT||High Strength 2″ (5.1cm) OD x 11 GA Tubing Square Flight Connection|
|UPPER BEARING||1 ¼” (3.2cm) Pillow Block Greaseable Ball Bearing|
|LOWER BEARING||1 ½” (3.8cm) Pillow Block Greaseable Ball Bearing|
|TUBE TRUSSING||5/16″ (0.8cm) Aircraft Type Galvanized Steel Cable|
|HYDRAULIC LIFT||Single 4″ (10.2cm) Cylinder with 5/16″ (0.8cm) Aircraft Cable|
|UNDERCARRIAGE||3″ (7.6cm) x 11 GA A-frame|
|AXLE||2 ½” (6.03cm) x 2 ½” (6.3cm) x 1/8″ (0.3cm) Wall Square Tubing|
|HUB||4-Bolt Agricultural Type|
|PTO SHAFT||14E Constant Velocity with 5/16″ Shear Bolt|
|PARKING JACK||2000 lbs. Side Wind|
|SPROCKET & CHAIN||Hardened Tooth Sprocket with #60 Chain|
|LOW PROFILE HOPPER DIMENSIONS||63″ Length x 40″ Width x 10.5″ Height|
|PSI REQUIRED TO RAISE AUGER||1000 | 1200 | 1400|
|HP REQUIRED (WITH DRY WHEAT)||50 | 60 | 65|
|TRANSPORT HEIGHT||12’6″ | 12’8″ | 13’10”|
|SPECS||MKX13-64 | MKX13-74 | MKX13-84 | MKX13-94|
|TUBE GAUGE||12 GA|
|TUBE CONNECTORS||Heavy-Duty ¼” Angle Flange|
|MAIN FLIGHTING||11 ¾” OD x ¼” Stretched & Welded (Wear Edge Technology™ at Critical Transfer Points)|
|WEAR EDGE TECHNOLOGY™||¼” plus 10 GA Ribbon Weld = 5/16″ Wear Edge Technology™ on Critical Grain Transfer Points|
|FLIGHTING SHAFT||High Strength 3″ (7.6cm) OD x 11 GA Tubing Square Flight Connection|
|UPPER BEARING||1 ¾” (4.4cm) Pillow Block Greaseable Ball Bearings|
|LOWER BEARING||2″ (5.1cm) Pillow Block Greaseable Ball Bearings|
|HYDRAULIC LIFT||Dual 4″ (10.2cm) Single Acting Cylinders with 5/16″ Aircraft Cable|
|AXLE||4″ x 4″ Square Tubing|
|HUB||6-Bolt Agricultural Type|
|PARKING JACK||5000 lbs. Side Wind|
|SPROCKET & CHAIN||Hardened Tooth Sprocket with HD #80 Chain|
|LOW PROFILE HOPPER DIMENSIONS||60″ Length x 40″ Width x 10 ½” Height|
|PSI REQUIRED TO RAISE AUGER||1600 PSI | 1600 PSI | 1800 PSI |2000 PSI|
|HP REQUIRED (WITH DRY WHEAT)||100 HP | 125 HP | 135-155 HP | 145-165 HP|